Parkside PSFS 250 A1 - Handbuch (Seite 6)

6 GB/CY
Introduction
Combination Cutter PSFS 250 A1
Introduction
Congratulations on your new product. You have
selected a high quality product. The instructions for
use are a part of this product. They contain impor-
tant information about safety, use and disposal. Be-
fore using the product, please familiarise yourself
with all the operating and safety instructions. Only
use the product as described and for the indicated
purpose. When passing this product on to others
please be sure to also include all of its documentation.
Intended use
This device - used with the recommended tools and
accessories - is designed to deal with materials
such as wood, plastic, fibre boards, wall tiles
aluminium and iron sheets. It is also suitable for
grinding using various cylindrical grinders and for
milling using milling bits with a shank diameter of
4.8 mm. Any other use or modifying the device is
considered improper use and involves considerable
accident risks. The manufacturer is not liable for
damage caused by improper use. Not intended for
commercial use.
Features
1 Locking switch
2 Variable speed control
3 Mains lead
4 ON / OFF switch
5 Wing setscrew
6 Dust extraction nozzle
7 Base plate
8 Collet
9 Wing bolt (base plate)
10 Clamping nut
11 Spindle lock button
12 Louvres
13 Stop plate
14 Open-ended spanner
15 Circle / parallel cutting guide
16 Sanding belts
17 Slot cutter (HSS)
18 Multi-purpose cutter (HSS)
19 Adapter (dust extraction nozzle)
Scope of delivery
1 Combination cutter PSFS 250 A1
1 Parallel fence with circle cutting function
1 Dust extraction adapter
1 Open-ended spanner
1 Multi-purpose cutter (HSS)
1 Slot cutter (HSS)
1 Sanding belt tensioning arbor
6 Sanding belts
1 Operating instructions
Technical Data
Rated power input: 250 W
Voltage:
230 V∼, 50 Hz
Idle speed (n
0
): 10,000–28,000 rpm
Collet capacity: 4.8 mm
Protection class: II /
Noise and vibration data:
Noise value determined according to EN 60745.
The A-rated noise level of the electric tool is typically:
Sound pressure level:
75 dB(A)
Sound power level: 86 dB(A)
Uncertainty K: 3 dB(A)
Wear hearing protection!
Evaluated acceleration, typically:
Hand- / arm vibration a
h
< 2.5 m / s 2
Uncertainty K = 1.5 m / s 2
The vibration level specified in
these instructions was measured in accordance
with an EN 60745 standardised measurement pro-
cess and can be used to compare equipment. The
vibration emission value specified can also serve as
a preliminary assessment of the exposure.
The vibration level will change according to the ap-
plication of the electrical tool and in some cases,