Crivit Tele-Trip 300 - Handbuch (Seite 5)

5 GB/IE
Casting the rod
• Activate the rewind stop (8) and tilt the line
guard (3) forwards so that the fishing line
(9) can unreel freely.
• Cast the rod. Turn the winder (6) a little –
the line guard (3) automatically clicks into
position.
Maintenance and cleaning
After use in salt water, rinse the rod and the
reel in luke-warm water. When the reel is dry,
lubricate all moving parts with one or two
drops of oil in order to keep it in good working
condition and maximize the duration of its
useful life.
Disposal
Please dispose of the product and packaging in
an environmentally friendly manner, separating
different materials for recycling as required!
Dispose of this item through an authorised
disposal company or through your local waste
disposal facilities - ask your local authority for
information if further guidance is required.
Ensure that you comply with all regulations
currently in force.
3 years warranty
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
• Pay due regard to other anglers (and any
other people) and keep a safe distance.
Some risk of injury exists from the hook
snapping back/sideways in an unpredictable
direction when casting the line if this is not
done properly.
• To prevent hook injuries, wear the appropriate
glasses and protective headgear.
• Do not carry out repairs yourself. Consult the
service department.
• Keep the fishing rod out of reach of children.
• Only allow children to use the fishing rod
under the instruction and supervision of an
adult.
use
Before using
Caution: Before fishing, enquire about
national laws and local regulations. These
instructions give the general directions for using
the product. The sport of angling is well-develo-
ped, with many aspects. We therefore
recommend reading appropriate specialized
literature and / or seeking advice from clubs
and associations.
how to assemble the rod
1. Insert the reel (4) into the reel supports (1).
Fasten it by turning the fixing screw (2)
clockwise.
2. In order to put the winder (6) in the desired
position, loosen the screw opposite (5) by
turning it anti-clockwise and when the
winder is positioned appropriately, tighten
the screw again.
3. Release the line reel brake (7) by turning it
anti-clockwise. Pull the fishing line (9) out
of the reel (4) and pass it under the line
guard (3) through all rings on the rod.
Tighten the line reel brake (7) again by
turning it clockwise.
4. Pull the rod out segment by segment, be-
ginning at the tip as in fig. D.
Never cast the rod to pull out the segments.