Assembly – Miomare Single-lever mixer Benutzerhandbuch

Seite 25

Advertising
background image

25

GB

gaskets are wear parts and therefore will need to be replaced from
time to time. Damaged parts could impact safety and function.

When the scald protection is defective or not activated, hot water

can lead to scalding. Therefore activate the scald protection as is
described in Chapter „Scald protection“ and check the settings
very carefully.

CAUTION! Be careful not to reverse the hot / cold water plaque

3

. The correct position is: left = red (hot water), right = blue (cold

water).

ATTENTION! RISK OF PROPERTY DAMAGE! Installation
may only be carried out by experts. Leakage or escape of water
can cause significant damage to buildings and household con-
tents. All connections must therefore be checked carefully to en-
sure that they are tight.

Ensure that all seals are correctly seated to avoid escape of water

due to leakage.

Familiarise yourself with all local conditions, e.g. water connections

and shut-off device, prior to installation.

This product is only suitable for use in rooms with temperature

above 0 °C. In case of potential frost, cut off the water supply and
drain the taps.

Assembly

Note: Familiarise yourself with the product prior to assembly. Carefully
read the following assembly instructions and safety advice. In the event
of incorrect installation, all warranty claims – particularly in relation to
subsequent damage – are excluded.

CAUTION! Before you start installation turn off the water supply
at the mains. Otherwise there is a danger of injury and / or dam-
age to the product.

90050_Waschtisch-Armatur_Content_LB1 (DE).indd 25

14.03.13 08:28

Advertising