Miomare Z30397A Z30397B - Handbuch (Seite 3)

3 GB/IE
Toilet Seat
Intended use
This product is not intended for commercial use.
Description of parts
and features
1 Hinge with threaded rod
2 Sealing cone washer
3 Metal washer
4 Plastic washer
5 Plastic nut
6 Metal nut
7 Wings for nut (tightening aid)
8 Toilet seat
9 Silicone cap
10 Battery box
11 Pile and loop fastening strip
12 Plug
13 ON / OFF switch
Supply Scope
2 Hinges with threaded rod
2 Sealing cone washers
2 Metal washers
2 Plastic washers
2 Plastic nuts
2 Metal nuts
1 Wings for nut
1 Toilet seat
1 Silicone cap
1 Battery box
1 Pile and loop fastening strip
2 1.5 V
AA batteries (Model Z30397 A)
3 1.5 V AA batteries (Model Z30397B)
1 Assembly instructions
Technical data
Dimensions: approx. 36 x 5.5 x 42 cm
(W x H x D)
Operating voltage: 3 V (Model Z30397 A)
4.5 V (Model Z30397B)
Battery: 2 x 1.5 V , AA
(Model Z30397 A)
3 x 1.5 V , AA
(Model Z30397B)
LED: 10 x 0.05 A (Model Z30397A)
10 x 0.042 A (Model
Z30397B)
Protection class: IP44 (spray water protected)
Maximum
load capacity:
150 kg
Model Z30397 A: red LEDs
Model Z30397B: blue LEDs
Material
Toilet seat:
Polyresin
Hinges: Stainless steel
Sealing washers: Plastic
Fixings:
Plastic / stainless steel
Safety information
PLEASE READ THE INSTALLATION INSTRUC-
TIONS BEFORE USE! PLEASE KEEP THE INSTAL-
LATION INSTRUCTIONS IN A SAFE PLACE!
CAUTION! RISK OF INJURY! Ensure all
parts are undamaged and correctly assembled.
Incorrect assembly poses the risk of injury.
Damaged parts may affect safety and function.
Do not stand on the toilet seat. It could break
apart, resulting in injury.
Do not allow the product to fall during installa-
tion. It could be damaged.
Ensure that all connections are firmly connected
and check all connection points for stability.
150 kg
Do not exceed the maximum permit-
ted load (150 kg) on the WC seat.
Failure to observe this advice may
result in injury and / or damage to the product.