Playtive Scooter - Handbuch (Seite 6)

6 GB/IE
3 years warranty
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory
guarantees or through goodwill do not extend
the warranty period. This also applies to
replaced and repaired parts. Repairs after the
warranty are subject to a charge.
IAN: 86106
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: [email protected]
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
You can also find spare parts for your product at:
www.delta-sport.com, category Service - Lidl Spare Parts
Service
After the exchange:
Should the wheel rub on the side, do
not use it! ensure that all screws are
still tight after a few minutes of driving
and that nothing has loosened or come
loose. tighten the wheel again, to
ensure, that it runs smoothly and that
there are no bearing noises.
Swapping the ball bearings (Fig. H)
• Remove the roll as described.
• Press the bearing out by pressing onto the
spacer (17) using an Allen key and remove
the spacer.
• Press the other bearing (18) out by pressing
with an Allen key.
• Press in a new bearing. Turn the wheel
around, insert the distance pieces and press
in a second new bearing.
• Fasten the wheels again.
Maintenance, storage
We recommend thorough cleaning and drying
the article after use. Remove little stones or
other objects that possibly have become stuck
on your wheels. Dry wet or damp ball bearings
with a clean cloth. Grease the bearings from
the outside with a suitable bearing grease, to
prevent rusting on the outside. Store the article
in a dry place.
Notes for disposal
Dispose of the article and all its components
using a certified disposal firm or your commu-
nal recycling facility. Please observe the current
regulations. If in doubt, contact your communal
recycling facility regarding environmentally
friendly disposal.
GB/IE