Silvercrest SDM 1000 A1 - Handbuch (Seite 8)

Donut Maker SDM 1000 A1
6 - English
Never make a knot in the power cable and do not together with other cables. The
power cable should be positioned so nobody can step on or be hindered by it.
Ensure the power cable does not touch hot surfaces of the Donut Maker (A).
Do not use adapter plugs or extension cables which do not meet the applicable safety
standards and do not manipulate the power cable! If the power cable is damaged it
must be replaced by the manufacturer or his customer service, or a similarly qualified
person to prevent hazards.
Copyright
All contents of these instructions are subject to copyright and are solely made available to the
reader for information purposes. Any copying or duplication of data and information without the
express written approval of the author is prohibited. This also pertains to the commercial use of the
contents and data. Text and illustrations are current at the time of print. Subject to change.
Before use
Remove the Donut Maker (A) from the packaging and remove all packaging materials. Check the
Donut Maker (A) for damage. Do not use the Donut Maker (A) if damaged.
Clean the Donut Maker (A) as described in chapter "Cleaning". Lightly grease the baking surfaces
(6) with butter, margarine or oil suitable for baking. This will make it easier for any manufacturing
residue on the baking surfaces (6) to release. Now plug the power plug into a power socket and
the Donut Maker (A) with the cover (3) once until the green indicator light (2) shows the baking
temperature has been reached.
Risk of burns! The temperature of accessible surfaces can be very high whilst baking.
A slight odour and even minimal smoke may form during first use due to manufacturing
residue. This is normal and will disappear after a short time. Please ensure adequate
ventilation. If necessary, open a window.
Now unplug from the power outlet and allow the Donut Maker (A) to cool off with the lid (3) open.
Next clean the Donut Maker (A) again as described in chapter "Cleaning".
The Donut Maker (A) is now ready for use.