Henkel LOCTITE 97725 - Handbuch (Seite 7)

7
3 Technical Data
Quality: If the required quality
is not achieved, install a
LOCTITE separator. Filtered 10 µm, oil-free, non-condensing.
Accessory Order No. 97714
Max. Air Pressure 6 bar (87 PSI)
Max. Agent Pressure 1.5 bar (29 PSI),
see operating manual pressure pot.
Air Consumption App. 90 l/min at 3 bar (43 PSI) and 0.5 mm
nozzle
Weight 0.240 kg
Length Duo Tube ~ 3 m (~10 ft)
4 Setup and Operation
Pay attention to the safety instructions in section 1.4 “For your Safety”.
4.1 Setup
If fluid output requires to be regulated individually, apply needle regulator with
counter nut 15 for quantity of fluid flow. To spray with a spray applicator a definite
volume of atomizing air and a definite pressure of materials is needed. Activating
the trigger will open the needle and the material flows out of from the nozzle. The air
pressure atomizes the material and forms it to a jet.
The needle function is: Opening by trigger and closing by spring force.
• Connect duo tube to pressure pot or other means of feeding fluid and to main air
supply.
Clear tube: for agents, connection M 17.
Blue tube: for air pressure, connection AIR 16.
• Set air pressure to required spray droplet size by the regulator for pressurized air
at the pressure pot, see operating manual pressure pot.
• Set agent pressure to required material outlet and spray droplet size by the
regulator for agents at the pressure pot, see operating manual pressure pot.