Metz LCD-TV 20 TM 52 - Handbuch (Seite 42)

- 38 -
Features
• It is a remote controlled colour television
and PC monitor.
• 100 programmes from VHF, UHF bands or
cable channels can be preset.
• It can tune cable channels.
• Controlling the TV is very easy by its menu
driven system.
• It has 2 pieces of Euroconnector socket for
external devices (such as video, video
games, audio set, etc.)
• Stereo sound system (German) is available.
• Multilanguage OSD.
• Teletext (Fastext, 7 pages).
• It is possible to connect headphone.
• A.P.S. (Automatic programming system)
• All programmes can be named.
• Programme swapping between last
watched two programmes.
• Forward or backward automatic tuning.
• Sleep timer.
• Child lock
• 4:3, 16:9 Auto switch
• Automatic sound mute when no transmis-
sion.
• When no valid signal is detected, after 5
minutes the TV switches itself automatically
to stand-by mode.
• NTSC Playback.
• TV Picture in PC.
• PLL (Channel Search)
• PC input (Support Up to 1024 x 768)
Panel Features
• High resolution, 20-inch TFT LCD display.
• High contrast ratio (500:1 Typical)
• Brightness: 450 cd/m
2.
• High-speed response time 16 msec.
• Wide viewing angle (typical) 160° (horizontal)
and 120° (vertical).
• 8-bit colour depth, display 16.7 M colours.
Safety Precautions
1. Power Source
The TV set is designed to operate on 12 V
DC. The adaptor should be operated from a
230V AC, 50 Hz. outlet. Ensure you select
the correct voltage setting for your conve-
nience.
2. Power Cord
The power supply cord should be placed so
that it is not likely to be walked on or pinched
by items placed upon them or against it. Pay
particular attention to cord where it enters
the plug, power outlet, and the point where it
exits from the receiver.
3. Moisture and Water
Do not use this equipment in a humid and
damp place (avoid the bathroom, the sink in
the kitchen, and near the washing machine).
Do not expose this equipment to rain or wa-
ter, as this may be dangerous and do not
place objects filled with liquids on top. Avoid
from dripping or splashing.
4. Cleaning
Before cleaning, unplug the adaptor from the
main supply, outlet. Do not use liquid or
aerosol cleaners. Use soft and dry cloth.
5. Ventilation
The slots and openings on the receiver are
intended for ventilation and to ensure reli-
able operation. To prevent overheating,
these openings must not be blocked or cov-
ered in anyway.
6. Lightning
In case of storm and lightning or when go-
ing on holiday, disconnect the power cord
from the wall outlet.
7. Replacement Part
When replacement parts are required, be
sure the service technician has used re-
placement parts which are specified by the
manufacturer or have the same specifica-
tions as the original one. Unauthorised sub-
stitutions may result in fire, electrical shock,
or other hazards.