Sterling Power Products CHARGENPRO PTN2430 - Handbuch (Seite 4)

Installation for 5 battery bank system with high power to the domestic
Twin installation for larger Marine applications
FUSE
CHARGER AMPS
PLUS 30%
+
BATTERY TYPE
SELECTOR
+
+ +
+
+ +
LIVE
NEUTRAL
EARTH
POSITIVE
POSITIVE
POSITIVE
NEGATIVE
REMOTE CONTROL
FUSE
FUSE
CHARGER AMPS
PLUS 30%
FUSE
CHARGER AMPS
PLUS 30%
+
BATTERY TYPE
SELECTOR
+
+ +
+
+ +
LIVE
NEUTRAL
EARTH
POSITIVE
POSITIVE
POSITIVE
NEGATIVE
REMOTE CONTROL
FUSE
FUSE
CHARGER AMPS
PLUS 30%
Port engine Bow Thruster Main Domestic Battery Bank Gen Set Stbd Engine
Twin charger installation
Power Balancing
Remote control
The chargers can simply be mounted
anywhere close to the batteries, however we
were asked by some major boat builders to
reduce the foot print off 2 chargers, so we
came up with an aluminium A frame which is
used to mount 2 units on to it in such a way
that the combined footprint is about the same
as one unit. So in a nut shell the A frame is
not required unless the footprint is a issue.
The 2 chargers together will work ok with
each other, but on low power one of them will
always do a bit more work than the other.
This can be balanced if required, the Dual
charger balancing unit connects to each unit
and ensures that each unit contributes to
within 15% of each other.
Can be used on a single or dual installation
A frame Sterling Part number PCNA
Size in mm 525 L x 190 W x 210 H
Dual Power balancing unit Sterling Part
number PCND.
Remote control Sterling Part number PCNR REMOTE CONTROL
(OPTION)
Power
Fault
Power Alarm Function Select Enter
Sterling power
Pro Charge N Remote
Charger #1 Charger #2 Remote
Ready
Fault
Ready
Fault
Ready
Dual Charger Controller
Pro Charge N
S TERLING POWER PRODUCTS
Remote control
Part nos PCNR
Dual balancing
Part nos PCND
Bulkhead mounted
A Frame
Part nos PCNA