Sennheiser Sound Field System EMP 2015 - Handbuch (Seite 48)

ቤ
ባ
50
Battery status indication
The red LED ባ and the 8-segment bargraph on the display provide
information on the battery status.
Bargraph:
The bargraph indicates the (remaining) battery capacity in 3 steps:
8 segments: the full battery capacity is available,
4 segments: the battery capacity is sufficient,
1 segment: the battery is going flat, immediately replace the battery.
Note:
When turning on the transmitter with a partially used battery, it is possible
that all eight segments may show for a short period of time – if this happens,
re-check battery status after a few moments.
Red LED:
Red LED lit up: The transmitter is turned on and the
battery capacity is sufficient.
Red LED starts flashing: The battery is going flat! You should
immediately replace the battery.
Peak indication
The yellow LED ቤ at the top of the SK 500 transmitter lights up if the
audio signal at the microphone/line input ቧ is excessively high (AF PEAK).
Note:
The sensitivity of the microphone/line input
ቧ
can be adjusted via the
operating menu ( u “Adjusting the sensitivity”).