Sennheiser Sound Field System EMP 2015 - Handbuch (Seite 57)

59
8 Special adjustments
Basic functions of the Sennheiser operating menu
With the Soundfield System, all necessary adjustments to the transmitter
and receiver section settings can be made by using the
SET and ̆ and ̄
buttons. The settings are indicated on the respective displays.
Important:
After turn-on, press the ̆ / ̄ buttons to switch between the factory-
preset fixed frequency memories. The display starts flashing. Your
selection becomes effective immediately. Press the
SET button to
acknowledge your selection. The flashing stops.
1. Press the SET button to enter the top menu level:
By briefly pressing SET again, you can change to the next menu.
After approx. one second, the selected menu appears on the display and
then the current setting of the menu is indicated.
2. Press the ̆ / ̄ buttons to adjust the settings of the selected menu:
The new setting starts flashing on the display. If you return to the previous
setting, the flashing stops.
Important:
New settings become effective immediately and will be
retained in memory on turn-off!
N.B.: When changing transmitter frequencies, care should be
taken to avoid causing interference to other channels/users.
In the “ tunE ” and “ Ch no ” menu, the ̆ / ̄ buttons feature a “fast search”
function. If you briefly press the ̆ / ̄ buttons, you can jump either forwards
or backwards to the next setting. If you press and hold down a button,
you can scroll through the settings.
3. Press the SET button to return to the top menu level:
Have you finished your entries? Press the SET button to return to the top
menu level. The display then switches back to the standard setting.