AEG ELECTROLUX L 56840 - Handbuch (Seite 10)

Select the required programme by means of programme selector dial (1)
You can choose the right programme for any type of laundry following the descriptions on
the washing programme tables (see «Washing Programmes»).
Turn the programme selector dial to the required programme. The programme selector de-
termines the type of washing cycle (e.g. water level, drum movement, number of rinses) and
the washing temperature according to the type of laundry.
The pilot light of button 5 starts blinking.
The selector dial can be turned either clockwise or anticlockwise. Position
to Reset pro-
gramme/ Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position , to
switch the machine off.
If you turn the programme selector dial to another programme when the machine is work-
ing, the yellow pilot light of button 5 will blink 3 times to indicate a wrong selection. The
machine will not perform the new selected programme.
Select the SPIN speed or the RINSE HOLD option (Button 2)
When the required programme has been selected, your appliance automatically proposes
the maximum spin speed provided for that programme.
Press the button 2 repeatedly to change the spin speed, if you want your laundry to be
spun at a speed different from the one proposed by the washing machine.
The relevant light will light up.
RINSE HOLD : by selecting this option the water of the last rinse is not emptied out to pre-
vent the fabrics from creasing. When the programme has finished the pilot light 7.2 goes
on, the pilot light of button 5 and the pilot light (7.1) are off and the door is blocked to
indicate that the water must be emptied out.
To empty the water out please read chapter «At the end of the programme».
Programme option button
Depending on the programme, different functions can be combined. These must be selected
after choosing the desired programme and before depressing the button 5 . When these
buttons are pressed, the corresponding pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the yellow pilot light of the button 5 blinks for 3 times.
For the compatibility among the washing programmes and the options see chapter «Wash-
ing Programmes».
Select the STAIN option (Button 3)
Select this option to treat heavily soiled or stained laundry with stain remover (extended
main wash with time optimized stain action phase). The relevant light will light up.
This option is not available with a temperature lower than 40°C.
CAUTION!
If you wish to perform a programme with the stain option, pour stain remover into com-
partment .
10 Daily use