AEG ELECTROLUX SC 91841 - 5 I - Handbuch (Seite 32)

32
Operating and indicator panel Fridge
A. Mains pilot indicator (green)
B Fridge button ON/OFF
C Temperature setting button (for warmer temperatures)
D Temperature display
E Temperature setting button (for colder temperatures)
F COOLMATIC function "on" indicator (yellow)
G COOLTMATIC button
Starting Up - Setting the Temperature
1. Plug the mains plug into the mains socket.
2. Press ON/OFF (B)button can function the fridge compartment separately
with ON appliance.. The green mains pilot indicator illuminates. The applian-
ces start.
3. Press either the „C“ (+) or „E“ (-) button. The temperature display switches
over and the DESIRED temperature currently set flashes on the temperatu-
re display.
4. Set the required temperature by pressing the „C“ (+) or „E“ (-) buttons (see
section "Temperature setting buttons"). The temperature display will imme-
diately show the changed setting. Each time the button is pressed the tem-
perature is adjusted by 1 °C.
From a food safety point of view +5 °C should be considered sufficiently
cold for storing food in the fridge.
5. Once the required temperature has been set, after a short period (approx. 5
sec.) the temperature display will change and again indicate the current
ACTUAL temperature inside the fridge. The display will change from flashing
to continuous illumination.
Information! When the setting is changed, the compressor does not start
immediately if automatic defrosting is currently taking place. As the stora-
ge temperature within the fridge is reached quickly you can store food
immediately after switching on.
°C °C °C °C
ON/OFF ON/OFF
ALARM OFF
A B C D E G F