Temperature setting buttons, Temperature display, Coolmatic – AEG ELECTROLUX SC 91841 - 5 I Benutzerhandbuch

Seite 33

Advertising
background image

33

Temperature setting buttons

The temperature is adjusted using the „C“ (+) and „E“ (-) buttons. These but-
tons are connected to the temperature display.

The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the DESI-
RED temperature (Temperature display flashes) by pressing one of the two
buttons, „C“ (+) or „E“ (-).

Each time one of the two buttons is pressed again the DESIRED temperature is
adjusted by 1 °C. The DESIRED temperature must be reached within 24 hours.

If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL tempe-
rature.
DESIRED temperature means:

The temperature that has been selected for inside the fridge. The DESIRED
temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the fridge.
The ACTUAL temperature is indicated with illuminated numbers.
Setting the refrigerator compartment to + 5°C and the freezer compart-
ment to -18°C the appliance activates a function mode that permite to
optimize the food perservation and energy comsumption .
Such a function garantees the maximum silentness during the perfor-
mance of the appliance

Temperature display

The temperature display can indicate several pieces of information.

During normal operation, the temperature currently present in the fridge
(ACTUAL temperature) is displayed.

When the temperature is being adjusted a flashing display indicates the
fridge temperature currently set (DESIRED temperature).

COOLMATIC

The COOLMATIC function is suited for quick cooling of large quantities of
goods in the refrigerator.

1.

The COOLMATIC function is switched on by pressing the COOLMATIC but-
ton. The yellow light illuminates.
The COOLMATIC function now provides for intensive cooling. A DESIRED
temperature of +2 °C is automatically selected. The COOLMATIC function is
ended automatically after a period of 6 hours.

2.

The COOLMATIC function can be ended manually at any time by pressing
the COOLMATIC button again. The yellow light goes out.

Advertising