Topcom BUTLER 1651 - Handbuch (Seite 14)

14 Topcom Butler 1651/Twin/Triple/Quattro
Topcom Butler 1651Twin/Triple/Quattro
If you press and hold the INT key for 3 seconds you can talk with the 2nd handset
and external line at the same time (conference call)
– Or press the INT key again to return to the external call.
Æ Press the Line button to end the call.
9.2 Internal call (intercom)
• In standby press the INT key followed by the number (1-4) of the other handset.
• The other handset will start to ring. You can stop the ringing by pressing the Line
button .
• If the other handset answers the call by pressing the Line button you can talk
internally.
• Press the Line button to end the call.
10 Reset of the handset
This will undo all changes and set back all default settings (ringer volume, ringer melody,
etc...).
Press Menu button
Æ Use the Right button to scroll to ‘RESET’ and press OK Æ
Enter the pin code (0000) and press OK Æ The unit will go back to standby.
Default handset settings are:
Handset volume 3
Handset melody 9
Flash time Short
Dial mode Tone
11 Answering Machine
The Butler 1651 has a built-in digital answering machine with a recording capacity of 80 min.
The answering machine can be operated remotely and features the possibility of recording
two outgoing messages (OGM 1 and OGM 2) (maximum of 2 min).
There are 2 possibilities:
•
With OGM 1, the caller has the possibility to leave a message
• With OGM 2, only the outgoing message is given without the caller having the
opportunity to leave a message
The max. recording time for each incoming message = 3 min.
11.1 LED Display
The LED display on the base indicates how many messages you have received. When there
are new messages, the LED display on the base will blink and only indicate the amount of
All memories (redial, phonebook, call log,...) and handset name will not be
erased!