Zanussi ZOU235X - Handbuch (Seite 35)

Electrolux
35
Hotplate control knobs
The control knobs for the hotplates can be found on
the oven control panel. The energy regulator of the
hotplates can be set by means of a 9-position control
knob:
0 = OFF
1 = Minimum
9 = Maximum
The intermediate positions give an increasing
heating power.
Double circuit cooking zone
(Check the combination hob list in the
"Technical Data" chapter)
If you wish to have the two electric circuits work
simultaneously, turn the knob to maximum
position
9 and then turn it towards symbol “ ” .
You will hear a click. Now the 2 circuits work
together.
Then, you can regulate the power of the cooking
zone by turning the control knob anticlockwise.
Carefully supervise cookings with oil
or fats, since these types of food can
result in a fire, when over-heated.
Remove all packaging, both inside and
outside the oven, before using the oven.
Before using for the first time, the oven should
be heated up without food.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is caused by
manufacturing residues.
The oven will only work if the time of
day has been set.
Ensure the room is well ventilated.
1. Switch the oven function control knob to
fan cooking .
2. Set the thermostat control knob to 250.
3. Open a window for ventilation.
4. Allow the oven to run empty for
approximately 45 minutes.
This procedure should be repeated with the
grill function for approximately 5-10 minutes.
Then let the oven cool down. Then
dampen a soft cloth with warm water and a
little mild washing-up liquid and use this to
clean the oven cavity.
Before using for the first time, carefully wash
the oven accessories as well.
)
Before using the oven for the first time
To open the oven door, always hold the
handle in the centre.