AEG S54000KMX0 - Handbuch (Seite 32)

Problem Possible cause Solution
The appliance is
noisy. The appliance is not sup-
ported properly. Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
The buzzer sounds.
The Alarm icon flash-
ing. The door is not closed
correctly. Refer to "Door open
alarm".
upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not
be possible)
“dEMo” appears on
the display. The appliance is in dem-
onstration mode. Keep pressed approxi-
mately 10 sec the OK but-
ton since a long sound of
buzzer is heard and the
display shut off for a short
while: appliance start
works regularly.
The compressor runs
continuously. The Temperature regula-
tor may be set incorrectly. Set a warmer temperature.
The door is not closed
correctly. Refer to "Closing the
door".
The door has been
opened too frequently. Do not keep the door
open longer than necessa-
ry.
The food temperature is
too high. Let the food temperature
decrease to room temper-
ature before storage.
The room temperature is
too high. Decrease the room tem-
perature.
Water flows inside
the refrigerator. The water outlet is clog-
ged. Clean the water outlet.
Food prevent that water
flows into the water col-
lector. Make sure that food do
not touch the rear plate.
Water flows on the
ground. The melting water outlet
does not flow in the evap-
orative tray above the
compressor. Attach the melting water
outlet to the evaporative
tray.
The temperature in
the appliance is too
cold. The Temperature regula-
tor may be set incorrectly. Set a warmer temperature.
32 www.aeg.com