Installation, 1 positioning, 2 location – AEG S54000KMX0 Benutzerhandbuch

Seite 34: 3 installation of the taste guard filter

Advertising
background image

8. INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.

8.1 Positioning

Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:

Cli-
mate
class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

8.2 Location

A

B

100 mm min

20 mm

The appliance should be installed well
away from sources of heat such as radia-
tors, boilers, direct sunlight etc. Ensure
that air can circulate freely around the
back of the cabinet. To ensure best per-
formance, if the appliance is positioned
below an overhanging wall unit, the min-
imum distance between the top of the
cabinet and the wall unit must be at least
100 mm . Ideally, however, the appliance
should not be positioned below over-
hanging wall units. Accurate levelling is
ensured by one or more adjustable feet
at the base of the cabinet.

WARNING!
It must be possible to disconnect
the appliance from the mains
power supply; the plug must
therefore be easily accessible af-
ter installation.

8.3 Installation of the Taste Guard Filter

The Taste Guard Filter is an active car-
bon filter which absorbs bad odours
maintain the best flavour and aroma for
all foodstuffs without risk of odour cross
contamination.
On delivery the carbon filter is in a plas-
tic bag to preserve performance.
• Open the air lever flap.
• Take the filter out of the plastic bag.

34 www.aeg.com

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: