Installation – Zanussi ZWN7140AL Benutzerhandbuch
Seite 23
Programmes
Load
(kg)
Energy con-
sumption
(kWh)
Water con-
sumption (litre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture
(%)
1)
Standard 60 °C
cotton
8
1.17
61
205
52
Standard 60 °C
cotton
4
0.77
49
159
52
Standard 40 °C
cotton
4
0.7
48
161
52
1) At the end of spin phase.
Off Mode (W)
Left On Mode (W)
0.10
0.98
The information given in the charts above are in compliance with the EU Commission regulation 1015/2010
implementing directive 2009/125/EC.
Installation
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever has
to be transported again.
After removing all the
packaging, carefully
lay machine on it's
back to remove the
polystyrene base
from the bottom.
Remove the power
supply cable and the
hose from the hose
holders on the rear of
the appliance.
Unscrew the three
bolts.
Slide out the relevant
plastic spacers.
Open the porthole,
remove the polystyr-
ene block fitted on
the door seal and pull
out all items from the
drum.
Fill the smaller upper
hole and the two
large ones with the
corresponding plastic
plug caps supplied in
the bag containing
the instruction book-
let.
23
www.zanussi.com