Oven cavity, Cleaning the oven door – Zanussi ZOU132X Benutzerhandbuch

Seite 42

Advertising
background image

Electrolux

42

Oven Cavity

The enamelled base of the oven cavity is best

cleaned whilst the oven is still warm.

Wipe the oven over with a soft cloth soaked in

warm soapy water after each use. From time to

time it will be necessary to do a more thorough

cleaning, using a proprietary oven cleaner.

Cleaning the Oven Door

Before cleaning the oven door, we recommend

you to remove it from the oven.

Proceed as follows:

1. open the oven door completely;

2. find the hinges linking the door to the oven

(Fig. 1);

3. unlock and turn the small levers located on the

two hinges (Fig. 2);

4. handle the door by its left- and right-hand sides,

then slowly turn it towards the oven until it is

half-closed (Fig. 3);

5. gently pull the oven door off its site (Fig. 3);

6. place it on a steady plan;

Clean the oven door glass with warm soapy

water and a softh cloth only. Never use harsh

abrasives. Once the cleaning is carried out, refit the

oven door, following the procedure in reverse.

Stainless steel or aluminium appliances:
We recommend that the oven door is only

cleaned using a wet sponge and dried after

cleaning with a soft cloth.

Never use steel wool, acids or abrasive

products as they can damage the oven surface.

Clean the oven control panel following the same

precautions.

DO NOT clean the oven door while

the glass panels are warm. If this

precaution is not observed the glass

panel may shatter.

If the door glass panel becomes chipped or has

deep scratches, the glass will be weakened and

must be replaced to prevent the possibility of the

panel shattering. Contact your local Service Centre

who will be pleased to advise further.

Fig. 1

Fig. 2

Fig. 3

Advertising