Xoro HRS 2500 - Handbuch (Seite 59)

HRS 2500 ENG 15
Engl
ish
First Time Installation
Auto Time Zone
Here you can set the Time Zone setting automatically. The information will be taken from the
EPG information.
You can set also the Time Zone manually. Here for choose the setting OFF and than the
next option is active.
Time Zone
Press the navigation buttons LEFT or RIGHT until your time (depending on Greenwich
Meridian) appears on the screen. Plus values are in east direction and minus values in west
direction.
Before you continue the next steps, you shall be sure about the satellite installation system.
Depend of the different way to install the dish and orientation, different kind of options are
available.
1. Single
connection between
Satellite / LNB and Receiver
If you orientates the dish to a specific satellite
and you use a single or Multi-LNB. Each LNB
is directly connected with the cable to the
receiver, than you uses these settings.
Switch off the two options Switch Type and
Toneburst.
•
Switch Type None
•
Toneburst Off
Navigate to the third option until the is
highlighted with dark blue. Start this option by
pressing the OK button. The list is empty.
Now you can add a satellite.
Press the RED button to add a satellite. A list
of presets satellites appears on the screen. Choose the
satellite which is orientated by the dish and confirm the
selection by pressing the OK button.
Settings
My Dish