AIPTEK X5 Manual - Handbuch (Seite 17)

Menu option Description and Available Option
Volume Adjust the volume level.
Available option: Off / 20% / 40% / 60% / 80% / 100%
Monitor Mode The function is based on motion detection mode. The
device will automatically change to power saving mode
if the recorded scene doesn’t change for 60 seconds,
and it will begin recording at 1fps. When the recorded
scene changes, normal 30fps recording will resume and
be saved in a new file. When this function is active,
manual emergency recording is not possible.
Motion detection
Mode Enable/Disable the motion detection. If this function is
enabled and the device detects any object movement, it
will automatically start the recording.
EV value Adjust the exposure compensation value to lighten or
darken the preview screen.
Available option: -2 / -1.5 / -1 / -0.5 / 0 / 0.5 / 1 / 1.5 / 2
Language Set the on-screen display menu language.
Available option: English / Traditional Chinese /
6LPSOL¿HG&KLQHVH5XVVLDQ-DSDQHVH*HUPDQ
Format Format the memory card.
A
YDLODEOHRSWLRQ &RQ¿UP&DQFHO
Note that all ¿OHV stored in the memory card will be gone.
TV System Set the TV type based on your local region.
Available option: NTSC / PAL
176&LVVXLWDEOHIRU$PHULFD7DLZDQ-DSDQDQG.RUHDareas.
PAL
LVVXLWDEOHIRU*HUPDQy,England ,Italy, Netherlands,
&KLQDDQG+RQJ.RQJDUHDV
LCD OFF Set the duration for the display to automatically turn off
right after video recording starts. (Inactivate in Monitor
Mode/Motion Detection Mode)
Available option: 30 sec. / 3 min. / 5 min. / Always on
Default 5HVHWDOOVHWWLQJVWRIDFWRU\GHIDXOWVHWWLQJV
A
YDLODEOHRSWLRQ &RQ¿UP&DQFHO
Version V LHZWKHGHYLFH¿UPZDUHYHUVLRQ
If the function is enabled, the system will enter battery mode
after switching off the engine. if there is no any object
movement for 60 seconds, LCD will be turned off and change
to power saving mode, when the recorded scene changes,
LCD will be turned on and return to normal recording, the
action will works until the power is run out. Battery Mode
14