ABUS CASA10010 Benutzerhandbuch
Seite 31
31
English
Activate the check box "Setting" and push the button "Handle".
Go to the menu item “Recording”. Then activate in the menu item ”Enable schedule” the desired
cameras which should be activated from IP alarm module by alarm signal from “Detector group 1” (remote
control)
Go to the tab „Reaction“ and set the checkbox “trigger relay output”.
Press the button “Settings” and select the target “U1 -< 1” to send the feedback command from the IP
alarm module to the remote control.
Confirm this by pushing „Apply“ and “OK” twice.
Quit the alarm menu and the main menu.
Now you can stop and start the schedule with the remote control manually.
If you activate the recorder by remote control only the schedule for the camera will be
activated /deactivated. Make sure that the recordingtime have been defined in the schedule
before.
6.3 How to learn in magnetic contact into recorder as alarm detector
Set up an additional alarm reaction in the recorder to start recording after triggering of the radio detector.