WolfVision VZ-8light 3 - Handbuch (Seite 6)

5
#31 ZOOM keys
The ZOOM keys work like the ZOOM WHEEL on the camera
head of the Visualizer. Using the ZOOM keys (wheel) also
switches auto iris on again.
#32 LASER POINTER key
Important: Do not stare directly into the beam.
This is hazardous for your eyes!
#33 PRESET keys (programmable settings)
For storing a preset, press one of the PRESET keys for more
than 2 seconds. For recalling a preset, press the PRESET key
quickly (see page 8).
#34 IMAGE TURN mode key
For picking up vertical (portrait) pages with higher resolution
(see page 9).
#35 LIGHT key
Switches the light on and off.
#36 AUTO FOCUS (AF) key
Switches the auto focus on and off.
#37 Manual FOCUS keys
When the FOCUS keys are pressed the Visualizer switches off
the autofocus function. The next time the AF-key is pressed,
autofocus is switched on again.
#38 FREEZE key
Freezes the current image. The FREEZE light indicates if the
FREEZE-mode is activated.
Infrared Remote Control VZ-8plus³ only
MENU
WIDE TELE
1 2 3 A A
MEMORY
1 2 3
4 5 6
7 8 9
POWER
LASER
PRESETS IMAGE TURN
FREEZE
FOCUS
HELP
ALL IRIS
WHITE
AF
EXTERN
LIGHT
#32
#31
#35
#37
#40
#36
#38
#45
#39
#41
#43
#42
#44
#31
#33
#34
#39 ALL key
For displaying all 9 pictures of the memory as split image (see page 9).
#40 Manual IRIS keys (brightness adjustment)
When the IRIS keys are pressed, the Visualizer switches off the Auto iris function.
The next time the ZOOM keys/wheel are used the auto iris is switched on again.
For specialists: The overall iris level can be changed in the on-screen menu (see page 13).
#41 SELECT keys (double function of MEMORY keys 2, 4, 6 and 8)
For navigating through the on-screen menu (see page 13).
#42 HELP/RESET key for on-screen menu (double function of MEMORY key 5)
While you are in the on-screen menu you can activate the on-screen help by pressing the
number 5 key. Pressing this key for 2 seconds resets the selected menu item (see page 13).
#43 MEMORY keys 1 - 9
For saving and recalling pictures (see page 9).
#44 EXTERN key / MENU key
This switches between Visualizer image and external input (see page 10).
Pressing this key for 1 second activates the on-screen menu (see page 13).
#45 POWER key
Pressing this key switches the unit on and off. When switching on the unit, the Visualizer runs
the power-on preset.