WolfVision VZ-C6 Installation - Handbuch (Seite 6)

www.wolfvision.com/visualizer/index.php/en/distance-calculation
A very useful method to calculate the exact positioning and the possible image sizes is a dedicated
calculation program on WolfVision's homepage:
Calculation program on WolfVision Homepage
5
If the Visualizer needs to be suspended further from the ceiling than with the supplied ceiling mount (in
order to allow greater magnification), a standard ceiling mount or ceiling lift for projectors may be used.
An adapter plate, suitable for weight and screw fittings for the Visualizer, might be necessary.
Designed for Ceiling-mount with VESA standard (
□ 75)
Fixing the assembly to the ceiling is dependent on the respective construction and desired mounting
location.
Ensure that the ceiling construction is able to carry a weight of 26kg (58lbs) and that possible
collision accidents are prevented.
Important: Please give special attention to the country specific regulations for training and
conferencing rooms!
G IMPORTANT: Ensure solid mounting and secure connection of all parts to avoid the
possibility that the unit detaches itself from the ceiling.
Installation of an Additional Ceiling Mount (third-party)
When the unit is built-in into the ceiling or into a plenum box, the infrared receiver may be covered. If the
internal infrared receiver is insufficient, the optional external infrared receiver should be connected to the
"IR-SENSOR" port.
Alternatively, the unit can be controlled via LAN.
The Ceiling Visualizer is plenum rated and a plenum box is not necessary. However when the Ceiling
Visualizer will be installed in a Plenum box keep enough clearance around to enable mechanical fine-
adjustment of the Visualizer by moving and rotating.
Installation in a Suspended Ceiling or Plenum Box