Codes - Short Keys
Storing Presets:
Press one of the PRESET keys (#25) for 2
seconds.
Activating the on-screen menu:
Press the MENU key (#21).
One-push auto focus:
Press the AF key (#28).
Storing Images:
Press one of the MEMORY keys (#36) for 2
seconds.
Filling the Image Memory quickly:
By pressing the SNAPSHOT key (#34) the image
is stored in the next free memory (1-9). If the
memory is full, a message appears on the screen.
When an USB-stick is connected, the images will
be stored on the USB-stick.
Change IR code:
Change the IR code in the
"Miscellaneous Settings" (code A is default).
Change the IR code on the remote control too by
pressing simultaneously PRESET 1, PRESET 2
25 and ZOOM TELE 31
in the order given
ress PRESET 1, PRESET 2
25 and ZOOM WIDE 31).
Resolution Settings:
Set resolution to AUTO:
Keep pressed both FOCUS keys (#29)
simultaneously for 2 seconds (max. 10sec.),
release it and press the MEMORY 5 (#37) key.
Set resolution Up:
Keep pressed both FOCUS keys (#29)
simultaneously for 2 seconds (max. 10sec.),
release it and press the MEMORY 2 (#24) key.
Set resolution Down:
Keep pressed both FOCUS keys (#29)
simultaneously for 2 seconds (max. 10sec.),
release it and press the MEMORY 8 (#24) key.
Recall Default Settings:
Keep pressed both FOCUS keys (#29)
simultaneously for 2 seconds (max. 10sec.),
release it and press the MEMORY 4 (#24) key.
Demo-Mode:
Press the POWER key (#39) for 2 seconds.
on-screen menu
(#
)
(#
) to switch from code
A to B, C, D ... A ...
.
For resetting the remote control to code A
simultaneously p
(#
)
(#
21
#29
#30
#35
#26
#25
#37
#22
#21
#39
#36
#31
#28
#27
#24
#32
#33
#34
#38
#23