WolfVision VZ-C6 User Manual - Handbuch (Seite 28)

Codes - Short Keys (IR-Remote Control)
27
#35
#37
#43
#32
#31
#23
#38
#34
#33
#26
#41
#42
#36
#30
#40
#39
#29
#27
#24
#25
#28
#44
#47
#46
#48
#45
Storing presets:
Press the desired PRESET key (#31) for 2 seconds.
Recalling presets:
Press the desired PRESET key (#31) quickly.
Activating the on-screen menu:
Press the MENU key (#47) to activate the on-screen menu. Use the Navigation keys (#25 and #46) to
navigate and OK key (#26) to select. For the help function, press the ? HELP key (#24).
For resetting only the selected item press the ? HELP key (#24) on the remote control for 2 seconds
Activating the on-screen Extra menu:
Press the MENU key (#47) and keep it pressed until the extra menu appears
Resetting the output mode to the default of "XGA at 60Hz":
Simultaneously press both FOCUS keys (#35) on the remote control and keep it pressed until the
resolution will be changed.
Change IR code:
Change the IR code in the
"Advanced Settings / Miscelaneous Settings" and set the "IR
Code" to A, B, C or D (code A is default). To change the IR code on the remote control, simultaneously
press ress PRESET 1, PRESET 2 keys
and the ZOOM TELE key
ress PRESET 1, PRESET 2 and ZOOM
WIDE
.
.
on-screen menu
p (#31) (#38). Each time this key
combination is used, the code switches from A to B, C, D ... A ... in the order given.
For resetting the remote control to code A, simultaneously p
.
The LED on the remote control shows the selected code (it flashes one time for code A, two times for code
B, three times for code C and four times for code D).