Codes, Remote control – WolfVision VZ-9 User Manual Benutzerhandbuch

Seite 16

Advertising

CODES

Remote Control

Storing Presets:
Press one of the

PRESET keys (#32) for 2 sec.

Storing Images:
Press one of the

MEMORY keys (#40) for 2 sec.

By pressing the

FREEZE-key (#28) for 2 seconds, the image is

stored in the next free memory (1-9). If the memory is full, a
message appears on the screen.

Activating the on-screen menu:
Press the

MENU-key (#43) for 1 sec.

If the ir-remote control is not available, press the

EXT/INT-key (#29)

on the camera head for 2 second to activate the on-screen menu.
Use the

ZOOM-wheel (#25) and the FOCUS-keys (#26) to navigate.

For the help function, press the

AF-key (#27).

Switching the output mode:
Higher mode: Simultaneously press both

FOCUS-keys (#26) on the

camera head and the Number

2 (arrow-up) (#41) key on the remote

control Lower mode: Simultaneously press both

FOCUS-keys (#26)

on the camera head and the Number

8 (arrow-down) (#41) key on

the remote control.

Resetting the output mode to the default of "auto resolution":
Simultaneously press both

FOCUS-keys (#26) on the camera head

and the Number

5 key (the middle of the number keys) (#42) on the

remote control.

Resetting the Visualizer's menu:
For resetting the whole menu simultaneously press both

FOCUS-

keys

(#26) on the camera head and the Number 4 key (back arrow)

(#41) on the remote control.
For resetting only the selected item press the Number

5 key (#42) on

the remote control for 2 seconds.

Video output (PAL or NTSC):
PAL: Simultaneously press both

FOCUS-keys (#26) on the camera

head and the

Preset 1 (#32) key on the remote control

NTSC: Simultaneously press both

FOCUS-keys (#26)

on the camera head and the

Preset 2 (#32) key on

the remote control.

Filling the memory quickly:
Press the

ALL-key (#39) for more than 4 sec. Then follow the

instructions of the on-screen menu (Press

MEMORY 1 (#40) for

snapshot or

MEMORY 3 (#40) to erase the memory).

Change ir-code:
Change the ir-code in the

"Misc. Settings" (code A

is default). Simultaneously press

PRESET 1, PRESET 2

and

ZOOM TELE

ress

PRESET 1, PRESET 2

and ZOOM WIDE

on-screen menu

(#32)

(#30) to switch from code A to B, C, D ... A ...etc. For

resetting the remote control to code A simultaneously p

(#32)

(#30).

Advertising