WolfVision VZ-17 - Handbuch (Seite 15)

15
Parallel port
(15-pin D-Sub, 12-24 V)
* Parallel GND is the ground for the opto-isolated control inputs. DC GND is the ground for DC + 12 V and also for Video out.
If you want to use DC + 12 V for the control inputs make a connection between DC GND and Parallel GND.
** If the relay is open: Resistor value at least 3k3.
1. Relay-Out (closed if the arm is complete down) **
2. Lock Arm (if activated, no arm function is possible)
3. Power ON
4. Power Off
5. Arm Up
6. Arm Down
7. Parallel GND *
8. DC +12 V
9. Light On/Off
10. Zoom Tele
11. Zoom Wide
12. Mirror Up
13. Mirror Down
14. Shift inactive
15. GND 1. Relay-Out
2. Focus near
3. Focus far
4. Iris open
5. Iris close
6. Image On/Off
7.
8. DC +12 V
(closed if the arm is complete down) **
Parallel GND *
9. Preset1
10. Preset 2
11. Preset 3
12. Text Enhancement
13. Macro On/Off
14. Shift active
15. GND
First Function, Shift key is not activated Second Function, Shift key is activated
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
15-pin D-Sub connector, 12-24V
on unit, male, front side
DIMENSIONS
28 to 40mm
required
for cables
Cooling Air Inlet
Cooling Air
Outlet
15
20
28
85
100
130
185
225
290
430
580
600
750 0,59
0,79
1,10
3,35
3,94
5,12
7,28
8,86
11,42
16,93
22,83
23,62
29,53
mm Inch
All measurements in Millimeters
(for inch see list)