Elitegroup 321 - Handbuch (Seite 57)

6. Gently hold the grip of the HDD, lift it up to release from its
compartment.
7. To install the new HDD, you will need to align the tabs on the drive
bracket with the slots on the bay. Press down gently on the drive
bracket until it engages with the system. Do not force the drive into
place this can bend the pins on the hard drive.
8. Slide the compartment cover into place and be sure the screw holes
on the cover align completely with the screw holes in the case.
9. Secure the cover with the two screws.
55