AEG INDUKTIONS 88131 K-MN - Handbuch (Seite 28)

Description of the Appliance 28
Displays
Residual heat indicator
1
Warning! Risk of burns from residual heat. After being switched off, the cooking zones
need some time to cool down. Look at the residual heat indicator .
3
Residual heat can be used for melting and keeping food warm.
Control bar
The control bar is a special Touch Control field.
The control bar is touched where the desired
heat setting is positioned. The heat setting is
shown in the display. Correct to the left or the
right, if necessary.
Do not release before the desired heat setting is
reached.
3
If the control bar is touched for longer than 6
seconds, a signal sounds and the appliance
switches itself off.
The induction cooking zones create the heat
required for cooking directly in the base of the
cookware. The glass ceramic is merely heated by
the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of the elec-
tronics.
Display Description
Keep Warm setting STOP+GO function is set
- Heat settings To set heat settings
Power Power function is switched on
Fault Malfunction has occurred
Residual heat Cooking zone is still hot
Child safety device Lock/child safety device is engaged
Automatic switch off Switch off is active.