AEG INDUKTIONS 88131 K-MN - Handbuch (Seite 35)

35 Operating the appliance
Automatic switch off
Cooking surface
•
If after switching on the cooking surface, a heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking surface automatically switches itself off.
•
If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx.
10 seconds, a signal sounds and the cooking surface switches off automatically.
•
If all cooking zones are switched off, the cooking surface automatically switches itself
off after approx. 10 seconds.
Control panel
•
When the appliance is switched off, if one or more of the sensor fields on the control
panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic
signal switches itself off automatically when the sensor fields are no longer covered.
Induction cooking zones
•
In the case of overheating (e.g. when a saucepan boils dry) the cooking zone automat-
ically switches itself off. is displayed. Before being used again, the cooking zone
must be set to 0 and cooled down.
•
If cookware that is not suitable is used, lights up in the display and after 2 minutes
the indicator for the cooking zone switches itself off.
•
If one of the cooking zones is not switched off after a certain time, or if the heat set-
ting is not modified, the relevant cooking zone switches off automatically. is dis-
played. Before being used again, the cooking zone must be set to .
Heat setting Switches off after
1 - 3 6 hours
4 - 7 5 hours
8 - 9 4 hours
10
- P 1.5 hours