Allied Telesis AT-8600 Series Switch - Handbuch (Seite 15)

Installation & Safety Guide 15
Note Use the Mode Select button to toggle the Mode LEDs to the PoE state.
Toggling the Mode Selection button does not affect the normal operations of the
switch.
Mode - FULL OFF The port is operating in half-duplex
mode.
Green The port is operating in full-duplex
mode.
Mode - ACT OFF There is no activity on the port.
Flashing Green There is activity on the port. It is
transmitting and/or receiving data.
Link and Mode LEDs for the AT-8624PoE switch
LED State Description
L/A Status
(Top LED) OFF There is no link between the port
and the end-node.
100 Mbps Link Green The port is operating at 100 Mbps.
100 Mbps Activity Flashing Green There is activity on the port. It is
transmitting and/or receiving data
at 100 Mbps.
10 Mbps Link Red The port is operating at 10 Mbps.
10 Mbps Activity Flashing Red There is activity on the port. It is
transmitting and/or receiving data
at 10 Mbps.
Mode LEDs
(Bottom LED) OFF Either DC Mode or PoE Mode.
D/C Mode OFF There is no link between the port
and the end-node.
Full Duplex Green The port is operating in full duplex
mode.
Half Duplex Red The port is operating in half-duplex
mode.
Link and Mode LEDs for the AT-8624T/2M switch
LED State Description
8600isg.fm Page 15 Wednesday, June 22, 2005 2:46 PM