Sony KE-W50A10E - Handbuch (Seite 27)

KE-W50A10E
2-632-749-02
Us
ing the
Menu
27 GB
Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If
you connect a VCR or other recording equipment to the / 2 socket, you can then
record from the equipment connected to other sockets of the TV.
1
Press OK to select “AV2 Output”.
2
Press M/m to select one of the following, then press OK.
Auto: Outputs whatever is being viewed on the screen.
TV: Outputs broadcast from the aerial.
AV1: Outputs signals from equipment connected to the
/ 1 socket.
AV3: Outputs signals from equipment connected to the / 3 socket.
AV6: Outputs signals from equipment connected to the 6/ 6 socket.
Switches off the picture. You can still listen to the sound with the picture off.
1
Press OK to select “Picture Off”.
2
Press M/m to select “On,” then press OK.
The (picture off) indicator on the TV (front) lights up in green. To restore the picture,
press any buttons (except 2 +/- and 9).
Illuminates the SONY logo on the TV (front).
1
Press OK to select “Logo Illumination”.
2
Press M/m to select “Yes”, then press OK.
AV2 Output
Picture Off
Logo Illumination
01GB-KLV40XUK.book Page 27 Thursday, July 7, 2005 2:10 PM