AEG AR 4026 DVD - Handbuch (Seite 31)

English
31
is displayed on the touch-screen and the selected program
type flashes.

NOTE:
If you do not make your selection after approximately
5 seconds, the list disappears again.
When PTY has been selected the radio starts searching for
corresponding PTY information and stops when the PTY
information has been found.
If the searched program type is not found, the device returns
to the last listened to radio station. “PTY NONE” flashes in
the display.
If the PTY information being searched for no longer exists,
the PTY function automatically switches to normal mode.
TA Traffic Announcement
(Radio traffic service)
(Priority for Traffic Information)
The TA function is activated by pressing the AF/TA button
briefly. The TA symbol appears in the display. During radio
operation in one FM frequency band the search for a traffic
announcement station is started automatically (SEEK).
If an FM station is being received which transmits the latest
traffic announcements from time to time, the TP display
lights up.
When the TA function is switched on, the FM traffic an-
nouncements automatically interrupt CD/USB/CARD/BT
operation (The word TRAFFIC appears in the display).

NOTE:
The volume of the traffic announcements can be adjusted
using „TA VOLUME“ in the „RADIO“ settings menu.
After the traffic announcement has finished, the programme
that was previously running is resumed.
Interruption of the TA Function:
If you would like to interrupt the current traffic announce-
ment, press the AF/TA button briefly. The TA mode is
switched off as a result.
AF (Alternative Frequencies)
REG Function
AF is a function that works with the help of RDS ( Radio Data
System) and can only be used with FM stations. The radio
searches in the background for the best frequency reception
of the station that has been tuned into.
If the AF function has been switched on, the radio continu-
ously tests the signal strength of the AF frequency. The
test interval for each AF frequency depends on the signal
strength of the current station and varies from a few minutes
in the case of a strong signal to a few seconds in the case of
weak signals. Whenever the new AF frequency is stronger
than the station that is currently set, the device changes over
to this frequency for a short time. As the mute time during
the frequency change and the test time is very short, this is
almost inaudible during the normal programme.
The AF function is activated by holding down the AF/TA
button and the status of the AF function is indicated by an AF
symbol in the display.
• If the AF symbol appears in the display, the AF function
is switched on and RDS transmission data is being
received.
• If the AF symbol flashes in the display, the AF function is
selected but no RDS signal can be received at the mo-
ment.
• Press the AF/TA button long again to switch off this func-
tion. The AF symbol in the display goes off.
EON Function
The device can receive RDS EON data. EON refers to
the transmission of additional station information within a
transmitter chain. In the case of a traffic announcement (TA)
the device changes within a transmitter chain from a station
without radio traffic service to a corresponding station with
radio traffic service in the transmitter chain.
In the “RADIO” settings menu you can select between the
following options:
•
DX: the device attempts to obtain the EON TA informa-
tion from a station that is within range and thereby
improve the reception quality.
• LOCAL: switching over to a station whose signal level is
too weak is prevented.
Touch-Screen
The individual menus are displayed via the touch-screen. The
following settings can be carried out or changed. Change
the settings by lightly touching the screen with your finger.
Main Menu
• RADIO: select radio mode
• DISC: select CD/DVD mode
• USB: select USB mode
• SD: select CARD mode
• BLUETOOTH: select Bluetooth mode
• AV-IN: select audio/video input
• SETTING: call up the settings menu
05_AR4026DVD_AEG_SK.indd 31 03.08.11 12:32