ADAM Audio ARTist 5 - Handbuch (Seite 8)

8
3.2 USB
You can choose the USB input on the rear side of the speaker. Please
note that this speaker will automatically carry the left channel, so
it needs to be the speaker on the left side within your set up. This
speaker then must be connected to the right speaker via Stereo Link
as described under 3.1. The computer automatically detects your
ADAM speakers that are connected via USB, you only have to select
the “USB Audio DAC“ in your system‘s audio preferences.
Please note that if you decide to connect your speakers via USB it
will not be possible to integrate a subwoofer that way. If you want to
use a subwoofer in your setup, connect the sub to your audio source
first and then connect the ARTist speakers via the balanced XLR or
unbalanced RCA inputs.
3.3 3.5mm jack
On the front of the speaker (in between the power switch and the
volume control) there is a 3.5mm mini jack. If you would like to
use this input, please note that the speaker with a lead connected
to the mini jack will automatically carry the left stereo channel, so
it needs to be the speaker on the left side within your set up. This
speaker then must be connected to the right speaker via Stereo
Link as described under 3.1.
3.4 XLR
If you choose to use the balanced XLR connection, please use
two mono XLR cables. Each one of the two loudspeakers has to be
connected to one channel of the sound source.
3.5 RCA
a) If you want to use the unbalanced RCA connection without the
Stereo Link (see 3.1), please use two mono RCA cables. Each one
of the two loudspeakers has to be connected to one channel of the
sound source.
b) If you want to use the unbalanced RCA connection and the
Stereo Link (see 3.1), please use one mono RCA cable to connect
the sound source to the speaker that you wish to be in control of
the overall volume. Proceed as described under 3.1.
ARTist 3
150WATTS
ARTist 3
150WATTS
ARTist 3
150WATTS
3. Connecting the Speakers