Lenze GDC easy getting started - Handbuch (Seite 38)

Global Drive Control easy
L
36 GDC easy DE/EN 2.0
1 Preface and general information
With Global Drive Control (GDC) Lenze offers a program for comfortable commissioning,
parameterization and diagnosis of the Global Drive series 8200 and 9300.
The GDC version easy described in this Manual is specially designed for the frequency inverters of the
series 8200 and is provided with the following functions:
·
Guided commissioning using drive−specific dialogs for frequency inverter 82xx.
·
Menu−assisted parameterization. Simultaneous representation of menus and assigned codes
similar to Windows Explorer.
·
Parameterization with and without direct controller connection (online/offline operation), thus
enabling preparatory parameterization already in the office.
·
Automatic controller identification when operated at a serial port.
·
Communication via serial interface RS232/485, optical fiber ring or system bus possible.
·
Integrated interface for OPC (OLE for Process Control so that GDC − as OPC client − is able to
access bus servers supported by Lenze DriveServer.
·
Simplified troubleshooting through diagnostic function.
·
Monitor windows for the representation of 8 parameters which are updated periodically. The
values can be represented by different forms (point instrument, bar, trend, number).
·
Input assistent for motor data.
·
PC parameter set comparison with Lenze default setting or the momentary drive setting, to
determine which parameters were changed.
·
Complete parameter set transfer between PC and controller using one command.
·
Hardcopy of parameter settings for documentation purposes.
·
Saving/Loading the drive configuration for the exchange among different computers.
·
Convenient online help system.
Tip!
The full version of Global Drive Control (GDC) is provided with the following additional functions:
·
Guided commissioning using drive−specific dialogs also for 93xx controllers.
·
Simplified function block parameterization for 93xx controllers.
·
Oscilloscope function and function block editor.
1.1 Conventions used
This Manual uses the following conventions to distinguish between different types of information:
Type of information Marking Example
Names of dialog boxes, input fields
and selection lists italics The dialog box Options...
Buttons bold Click OK, to...