Weidmuller UCVR - Universal glavanically isolated signal converter Benutzerhandbuch
Seite 17
Advertising
17
Connections
For effective protection from electromagnetic noise, all signal cables
must be shielded, or located on conductive trays or in conduits.
Use 12-28 AWG Cu Wire rated for temperatures above 70 °C Only,
tighten to . lb-In. Strip wires to 7 mm from the ends. Use a suitable
ferrule for multi-stranded wires (do not solder).
Terminal
Signal
1
24 V DC (out)
Input signals
2
Current +
3
Common −
4
Voltage +
5
Not used
6
7
Link to change the set-up
Security Link
8
9
Neutral (−)
Power supply
10
Live (+)
11
Normally Closed
Alarm Channel One
12
Common
13
Normally Open
14
Normally Closed
Alarm Channel Two
15
Common
16
Normally Open
Case
Earthing is via a stud on lower side of case
Advertising