Ambient UMP II - Handbuch (Seite 14)

14 UMPII
START UP
SELECT PHANTOM 48V / 12V
INSERT BATTERIES
ASSEMBLING THE UMP II TO THE „QWB“ MOUNTING PLATE
Ambient Recording GmbH www.ambient.de
The UMP II is powered by two 1.5Volt AA‐ba;eries.
Open the ba;ery flap and insert the ba;eries.
Look to it that the polarity of the ba;eries is right.
Replace the ba;ery flap.
Assemble the UMP II downwards on to the
“QWB” mounLng plate.
The audio‐transmi;er can be mounted on the
other side of the “QWB”.
Install the cables – take care that the cables will not
produce background noise.
You can change Phantom power 48Volt to
Phantom power 12Volt with the switch inside.
Open the ba;ery flap, remove the ba;ery with the minus pole
outside, now you can see the switch.
Use a small flat‐headed screwdriver to change the switch‐posiLon
but please take care that you don’t scratch the PCB.