Ambient UMP II - Handbuch (Seite 16)

16 UMPII
SWITCHING ON / OFF
LED – DISPLAY
The “Mode” LED just light up when the microphone is connected and the selector switch is adjusted to
„PH“ or „T“.
Ambient Recording GmbH www.ambient.de
Connect the microphone and the audio‐transmiAer.
Switch the selector switch to Phantom (“PH”) or T‐power (“T”).
Which posiFon depends on which microphone is in use.
Switch posiFon PH → Phantom‐power
Switch posiFon T → T‐power
Middle‐posiFon → OFF
Please take care of PH48V or PH12V
– switchable with the internal switch.
ATer switching on, the Mode LED will light up in the
corresponding color.
If the Mode LED don’t light up, please control the microphone connecFon, operaFon
mode and baAeries.
OFF, no microphone is connected
BaAery OK, Phantom 48V (blue LED)
BaAery OK, Phantom 12V (yellow LED)
BaAery OK, T‐Power (green LED)
LOW BaDery, (Phantom 48V)