Metrohm 796 TP Backup - Handbuch (Seite 3)

796 TP Backup
2 8.796.8007 Instructions for Use
1 Introduction
The program offers the following possibilities:
Ÿ Methods, determinations, sample silos and access control files can be saved
on the PC and reloaded on the 796 Titroprocessor or the data card. These bi-
nary files can be sent back to the Titroprocessor to be viewed and edited.
Ÿ Determinations can also be saved automatically to the computer right after
completion, by using the ‘auto save’ function (Destination ‘RS232 x’).
Ÿ The built-in terminal program can be used for receipt and storage of individual
reports on the PC.
The files of the 796 Titroprocessor are transferred to the PC in the background,
work with the computer can continue normally. A small control box informs you
of the status of the transfer.
The 796 TP Backup version 1.0 is designed for the transfer (sending and receipt)
of data with the 796 Titroprocessor and the 5.796.0010 (or higher) program ver-
sion.
Switch to the dialog page Configuration of the 796 Titroprocessor to view the
program version.
Please refer to the 8.796.1003 Instructions for Use for operation of the 796 Titro-
processor.