Gossen DIGIFLASH 2 - Handbuch (Seite 36)

12 GOSSEN Foto- und Lichtmesstechnik GmbH
2.3 Flash measurement (only DIGIFLASH 2)
2.3.1 Setting the sync speed (measuring time)

Press the Function button for selecting the
function „flash measure-
ment“. A small stroke in front of the sync time will appear in the
display
to signal „flash metering“.

Keep the Function button pressed down until the ok signal sounds.
The display will now show the sync speed blinking.

Use the measuring key to input the desired sync speed, in the range
of 1 sec to1/500 sec. and confirm by pressing the function button.
2.3.2 Measuring

Push the measuring key. The DIGIFLASH 2 is ready to measure
for 30 sec, as long as „F“ in the display is on.

Trigger the flash.

Transfer the value measured from the display to the window in
the printed scales above and set it precisely under the indicator
line.

Read the f/stop in the upper part of the scale opposite the sync
speed you had preselected (for 1/90 read between 1/60 and 1/125).