Gossen DIGIFLASH 2 - Handbuch (Seite 41)

GOSSEN Foto- und Lichtmesstechnik GmbH
17
2.8 Watch/Alarm clock
WATCH - Setting the time

Use the function button to select the function WATCH and hold the
key down until the OK-signal will sound. 12/24 will flash.

With the function button select either 12 hours (AM/PM) - 24 hour display.

Confirm with the function button. The read-out "hours" will flash.

Use the key M to set the hours and confirm with the function button.
The read-out "minutes" in the display will flash.

Use the key M for setting the minutes. To confirm settings hold down
the function button until the OK-signal is heard.
ALARM CLOCK

Use Function button to enter the function "ALARM CLOCK" and hold it
pressed down until the OK-signal will sound. The time of the alarm clock
is set in the same way as the watch.

Hold the Function button until the OK-signal sounds.

The alarm is activated or deactivated with the measuring button.

When the alarm is activated it is shown in the display with a bell symbol.

When the alarm is sounded it will sound each second for 1 min. It can
be stopped by pressing either the measuring key or the function button.