Electrical connection, Electrical data, Psen me4 – Pilz PSENme 4A Benutzerhandbuch
Seite 7: Psen me4.2, Mechanical data, Installation and operating instructions

Installation and Operating Instructions
Electrical connection
The electrical connection shall only be carried out by trained and qualified personnel!
The electrical contacts of switches PSEN me4, PSEN me4.01, PSEN me4.1 and PSEN me4.11 feature 4 screw
terminals M3,5.
Tightening torque M = 0,8 Nm.
The electrical contacts of switches PSEN me4.2 and PSEN me4.21 feature 6 screw terminals M3.
Tightening torque M = 0,6 Nm.
The connection requires a stranded wire with ferrule or a solid wire with a cross section of 0,5 – 1,5 mm².
For safety circuits acc. EN 60204 use the normally closed contact(s) (N.C.) only.
Electrical data
PSEN me4
PSEN me4.01
PSEN me4.1
PSEN me4.11
PSEN me4.2
PSEN me4.21
Switching function
1 NO/1 NC (Zb)
2 NC (Zb)
1 NO/2 NC (Zb)
Switch symbol
Rated insulation voltage
U
i
250 V AC
250 V AC
250 V AC
Conventional thermal current
I
the
10 A
10 A
5 A
Utilization category
acc. IEC/EN 60947-5-1
AC-15, U
e
/I
e
240 V/3A
AC-15, U
e
/I
e
240 V/3 A
AC-15, U
e
/I
e
240 V/1,5 A
Type of short-circuit protection
10 A gL/gG
6 A gL/gG
6 A gL/gG
Melting fuse acc. IEC/EN 60947-5-1, annex K
Forced disconnection (N.C.)
IEC/EN 60947-5-1
Degree of protection
II, protective insulation
Mechanical data
Enclosure
Thermoplastic, glass fiber reinforced (UL94-V0)
Cover
Thermoplastic, glass fiber reinforced (UL94-V0)
Ambient air temperature
-30°C to +80°C, -22°F to +176°F
Cable entry
1 x M20x1,5
Protection class
IP65 acc. EN 60529; DIN VDE 0470 T1
Weight
≈ 0,13 kg
Actuating device
4AS
Actuator
Separate actuator (St stainless)
Actuating radius
≥ 150 mm
Extraction force
Standard 10 N
PSEN me4.01, PSEN me4.11, PSEN me4.21 50 N
Mechanical life
1 x 10
6
switching cycles
Mechanical life, extended actuation force
1 x 10
5
switching cycles
Switching frequency
≤ 30/minute
Date of issue: 15.04.2014 / Page 7 of 8
1003289-2EN-03 / Document: 0800000424 / Version: 3 / 2220-14
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, D-73760 Ostfildern, Deutschland
Phone: +49 711 3409-0, Fax: +49 711 3409-133, E-Mail: [email protected], www.pilz.com
Template : 0850174292 Orig. 2