Studiologic Studio 1100 - Handbuch (Seite 22)

39
STUDIO 1100
38
STUDIO 1100
MISCELLANEOUS FUNCTIONS
All of the parameters discussed above were associated with the four keyboard
zones. There are a few other functions which affect the operation of the instrument
as a whole.
RECEIVE CHANNEL
The active Studio 1100 preset may be changed by an external MIDI device
connected to the MIDI input on the back panel. The Studio 1100 will respond to
program change commands on the channel specified with the RCV CHANNEL
function.
To set the MIDI receive channel, press and hold any zone switch, then press the
FUNCTION 1 switch three times. Release both switches. The display will indicate
the current receive channel which may be changed with the slider. To disable
receipt of program changes, move the slider to select the dash "-". Press the
blinking FUNCTION switch to exit the edit mode.
PROGRAM SAVE AND LOAD
The Studio 1100 internal memory will retain data for thirty two presets. This data
may be saved into an external computer or storage device using the SAVE function.
Connect one of the Studio 1100 MIDI outputs to the MIDI input of the storage
device. Press and hold any zone switch. To send sys-ex memory data, press the
SAVE switch. After sys-ex has been transmitted, the unit will return to perform
mode.
To load the Studio 1100 memory from an external device, connect the MIDI output
of the device to the MIDI input of the Studio 1100. Press and hold any zone switch.
To enable receipt of sys- ex data, press the LOAD switch (the display will display
"L"). The Studio 1100 will remain in this mode, waiting to receive sys-ex data.
Activate the transmission of sys-ex data on the storage device. After the system-
exclusive data has been received, the Studio 1100 will return to Perform Mode. To
terminate load mode manually, press the blinking switch.
PRESET INITIALIZATION
The Studio 1100 is shipped from the factory with four demonstration presets in
locations 11 through 14. After these locations have been changed by the user, it is
possible to restore the four demo presets as follows:
1.Switch off power to the Studio 1100.
2.Press and hold the Load and Save switches.
3.Switch on Studio 1100 power.