TechniSat TechniLAN 4/4 Active - Handbuch (Seite 14)

14
EN
MONT_TechniLAN_4_4_aktiv_DE_EN.doc 04.09.2012 09:51 Seite 14
4 TechniLAN 4/4 aktiv
4.1 The Device
Illustration 10: TechniLAN 4/4 aktiv
4.2 Displays and Indicators
Power Indicator: lights up green as soon as the device is supplied with power.
Link Indicator:
blinks when a network connection exists,
displays the quality of the data being transferred via the coaxial cable.
• green: good transfer quality
• orange: sufficient transfer quality
• red: poor transfer quality
• not lit: no connection
Network LEDs (at the Ethernet sockets):
• green: data rates used at the port: at … 100Mbit/s; of … 10Mbit/s
• yellow: blinks when a network connection exists
4.3 Power Supply
Via the TechniLAN 4/4 aktiv 13V wall power supply, all TechniLAN participant sockets are
supplied with power. If a receiver, connected at the socket, has a higher voltage, for example 18 V
for the horizontal polarization, then this receiver takes over with supplying the participant sockets
with power with which it is connected. The receiver voltage is fed through to the multi-switch
and/or the LNB so that the reception level desired by the receiver can be reached.
The TechniLAN 4/4 aktiv is designed so that it can take over supplying power to the multi-
switches and the LNBs. Care should be taken that the maximum power allowed by the wall power
supply is not exceeded, especially in the case of systems without power supplies, which is for
example possible with the TechniSwitch 5/8.