TechniSat TechniLAN 4/4 Active - Handbuch (Seite 16)

16
EN
MONT_TechniLAN_4_4_aktiv_DE_EN.doc 04.09.2012 09:51 Seite 16
Power Consumption
(without sockets and
distribution technology) max. 400 mA
type 250 mA
Dimensions: L x B x H (mm),
Weight 121 x 114 x 33, 240 g
7 Error Search Assistance
Error Possible Causes Help
The data rate is too low. • Inputs and outputs of the
TechniLAN 4/4 active have
been switched.
• The dampening between the
TechniLAN 4/4 aktiv and the
socket is too effective
• Check whether or not the device is
correctly connected with the multi-
switch and/or the LNB.
• Check the cabling.
The green power LED
of a participant socket
does not light up. A short circuit has occurred
between the participant socket and
the TechniLAN 4/4 aktiv. • Check the cabling.
The power LED of the
TechniLAN does not
light up The wall power supply switched off
due to overloading • Check the cabling for short circuits.
• Connect a separate wall power
supply with the multi-switch.
The yellow traffic LED of
the participant socket
does not light up. Up to now, no successful LAN
connection could be established via
the coaxial cable • Wait a few seconds, establishing a
connection might take a few minutes.
• Check the cabling.
Connected receivers
signal short circuits
within the LNB cable for
specific programs The receiver is not capable of
supplying the TechniLAN socket as
well as the distribution system with
enough power, especially when
selecting programs from the
horizontal polarization (18 V). • Connect a separate wall power
supply with the multi-switch.
Your device is CE approved and meets all necessary EU standards.
Subject to changes and printing errors. Status 8/12
Reproduction and copies are only allowed with the consent of the publisher.
TechniSat is a registered trademark of
TechniSat Digital GmbH · P.O. Box 560 · 54541 Daun · Germany · www.technisat.com
www.technisat.com
22371790000100