AUDIOLINE BigTel 158 - Handbuch (Seite 48)

station. The battery status is shown on the display. When the battery capaci-
ty is nearly exhausted, the battery symbol (
) will flash and you will hear a
short beep (if activated / HS setting / HS sound / Low batt).
You should now put the handset for charging into the base station or the
charging station.
Setting the time and date on the handset
At initial operation the handset does not have the correct time (e.g. for
entries in the call list). The display shows “00:00” underneath the handset’s
name.
Date and time are set through the menu item “Clock/Alarm / Set time”.
Setting the display language
The display language is available in different languages. The default setting
is “German (Deutsch)”. Set the language using the menu item “HS setting /
Language” (“MT-Einstell. / Sprache“).
Auto Answer
If this function is activated, an incoming call is taken when the handset is
removed from the base station. The automatic answering function is activat-
ed and deactivated using the menu item “HS setting / Auto Answer”.
Switching the handset on and off
You can switch off the handset for saving battery capacity. You can not use a
switched-off handset; it will not ring on incoming calls.
Press and hold the
button for approx. 2 seconds. The handset will turn
off.
For re-activating the handset press and hold the
button for approx. 2
seconds again.
6
Preparing the Telephone