AUDIOLINE BigTel 158 - Handbuch (Seite 62)

20
Setting the telephone
/ Select
Boost and press OK.
/ Select one of the following options and press OK:
Memory on
Select this setting to activate the boost function permanent-
ly. This allows you to set the earpiece volume up to level 10
/ refer to the note on page 3.
Auto reset
Select this setting to activate the boost function only for the
current call. This allows you to set the earpiece volume up
to level 10 / refer to the note on page 3.
Off
Select this setting to deactivate the amplification. You can
set the earpiece volume in 5 levels.
Setting the contrast
Press the menu key.
/ Select
HS setting and press OK.
/ Select
LCD contrast and press OK.
/ Select the desired contrast and press OK.
Setting the handset name
Press the menu key.
/ Select
HS setting and press OK.
/ Select
Handset Name and press OK.
Use to delete characters then add new characters as
required (max. 10 characters).
Use
to switch to capitals and back again.
Press OK to finish.
Setting Auto Answer
Press the menu key.
/ Select
HS setting and press OK.
/ Select
Auto Answer and press OK.
/ Select
On or Off and press OK.
☞
If Auto Answer is on an incoming call will immediately be taken when the
handset is taken from the base.