Guntermann & Drunck HK-Controller 20 Installation - Handbuch (Seite 25)

Setup menu
G&D HK-Controller 20 · 6
Establishing a connection in the terminal emulator
How to establish a connection in the terminal emulator:
1. Start any terminal emulator (for example HyperTerminal or PuTTY).
2. Establish a new connection in the terminal emulator and enter the following settings.
3. Use the supplied service cable to connect the add-on’s Service interface to one of
the computer’s USB interfaces.
NOTE: You can use any installed terminal emulator (for example HyperTerminal) to
access the setup menu.
If you do not have a terminal emulator installed on your computer, you can use
PuTTY, which you can download for free under:
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Bits per seconds: 115.200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None